Pulse <Width>Pct

Description Make a pulse 110,20,25,50% of the x axis   Makes a new vector which is the length of the default and <Width> percent of the span the default vector. The pulse transition will take place at the nearest data point so that quantizing error may be an issue. Hot Key  none Script _width = default[length(default)-1] _width=_width - default[0] _width=_width * (.1,.2,.25,.5) result = pulse(_width) plot result Example Open scope and paste this script into the command window. Then press <Ctrl + R> to plot a sine wave Select "Build/pules/Pulse 50Pct, then multiply the result * y and plot it. (result = result * y plot result) set units = rad pi =4*atan(1) numpoints = 1000 time = (vector(numpoints)/(numpoints-1)*1m) newplot sineplot time setplot sineplot y = sin(2*pi*time*1k) plot y set units = deg